Charge regulator with MPPT (Maximum Power Point Tracking) technology for photovoltaic applications, equipped with LCD display and able to operate automatically both at 12 and at 24 V. The MPPT allows to always obtain, in any weather condition, the maximum power available from your photovoltaic system. It allows to supply the right degree of current to the batteries protecting them from an excess of discharge or charge in order to prolong their life cycle as much as possible.

• MPPT (Maximum Power Point Tracking)
• Automatic detection voltage 12 V / 24 V
• High tracking efficiency not less at 99,5%
• 98% conversion efficiency
• Very fast tracking speed
• Accurate recognition and tracking of multiple power points
• Automatic limitation function of the maximum FV input power
• Wide MPPT operating voltage range
• Liquid crystal  display
• Load control mode: manual, load ON / OFF, load ON + timer and test mode
• Supports 3 pre-programmed charging options for sealed lead acid batteries, Gel, Flooded (free acid)
• Battery temperature compensation function

The MPPT is an acronym of English origin which means Maximum Power Point Tracker (Search for Maximum Power Point). This point varies continuously depending on the level of solar radiation that hits the surface of the cells. This type of charge controller constantly analyzes the power (V * I) generated by the photovoltaic system, always providing the batteries with the maximum available charging current, considerably reducing the charging times.

• Rated voltage: 12 V / 24 V automatic detection
• Maximum charging current: 15 A
• Maximum charging power:
  - 195 watt a 12 V
  - 390 watt a 24 V
• Maximum discharg current: 15 A
• Maximum battery voltage: 8 to 32 V
• Maximum input voltage of solar panels: 100 V
• Cut-off voltage:
  - charged battery: 13.8 V (at 12 V) - 27.6 V (at 24 V)
  - low battery: 10.6 V (12 V) - 21.2 V (24 V)
• Reconnection voltage: 12.6 V (at 12 V) - 25.2 V (at 24 V)
• Loss of load: <20 mA (at 12 V) / <16 mA (at 24 V)
• Voltage drop: <0.18 mV
• Cable section to be used for battery and load: 6 mm² (AWG 10)
• Degree of protection: IP30
• Dimensions (mm): 171.7x154x49.3
• Weight: 670 grams