Accessories
Accessories
Magnetic Heated bed Sticker Flexible
The magnetic plate for 3D printer (with 200x200 mm printing plate) is composed of t..
Cod: 1606-HS1686
Price 11.00€
Plexiglass box for 3D4040 printer
Box for 3D4040 printer in KIT ideal for protecting the machine from drafts tha..
Cod: 7350-BOX3D4040
Price 183.00€
Filament monitoring trigger for 3D printer- 1.75 mm
It consists of a micro switch and a status LED, this small module is suitable for u..
Cod: 8300-YB785175MM
Price 6.60€
Filament monitoring trigger for 3D printer- 3 mm
It consists of a micro switch and a status LED, this small module is suitable for u..
Cod: 8300-YB7853MM
Price 6.60€
Silicone rubber heating mat 3M 20x20 cm 12V 200W
Heating mat to apply, using the 3M adhesive it has, under the glass plate of the 3D..
Cod: 2846-KA12V200W
Price 19.50€
Heater 12V 40W
Heater for extruder body of 3D printer (DMAKE and 3D4040 – see related products) . P..
Cod: 1606-RISC12V40W
Price 4.00€
3D Printer Heated Bed Power Module
If the high current of the hotbed brings multiple problems to your mainboard, this ..
Cod: 7100-FT1357K
Price 14.00€
MICRO SWITCH WITH LEFT 50 MM
Micro switch with 50 mm long metal lever. It has a normally open contact and one normall..
Cod: 7300-MSWITCH50MM
Price 1.80€
BuildTak for DMAKE printer
BuildTak is a thin sheet of adhesive plastic that provides an optimum print surface and allows to at..
Cod: 6968-BUILDTAKDMAKE
Price 9.84€
Aluminum heated plate for DMAKE printer - KIT
Aluminum made with 3 mm thickness, this heated plate is able to achieve a temperature greater than 1..
Cod: 7350-RISPLATEDMAKE
Price 27.79€
4 Metal clip for flat glass printing
Set containing 4 metal clips shown to attach the glass panel to the 3Drag printer. Dimensions (mm): ..
Cod: 2846-CLIP3DPLATE
Price 1.64€
Minishredder for PLA/ABS - to mount
Manual minishredder with frame and blades made of stainless steel AISI 304. It..
Cod: 7350-MINITRITURATORE
Price 368.00€
Glass panel for 3DRAG printer
Made of tempered glass of 3 mm thickness, this pan..
Cod: 8220-GP8200
Price 7.80€
DRV8825 Stepper Motor Driver Carrier, 2,2A
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping b..
Cod: 8218-DRV8825
Price 7.00€
Toothed rubber belt - 1.5 meters
Toothed rubber belt - 1.5 meters ..
Cod: 8220-BELT6T5/1500/SP
Price 11.50€
Flat cable multicolor
Multicolor flat cable length 3 meters, for 3DRAG ..
Cod: 8220-FC16C-3/SP
Price 4.10€
Needle syringe SIRBD50ML
Needle fo specifically for 60cc syringe for use with the set 3DChoco. N.B. the syringe is sold separ..
Cod: 7350-AGOMONG18
Price 0.95€
60cc syringe for 3DChoco
Sterile syringe dosing 60cc for use with the set 3DChoco. N.B. the needle is sold separately. ..
Cod: 7350-SIRBD50ML
Price 3.90€
Build Tak for 3D printer
This BuildTak sheet is an easy-to-install, heat-resistant, long-lasting 3D printing surface. Buil..
Cod: 8220-K8400-BT
Price 17.30€
Pulley 10 teeth
Pulley 10 teeth, 5 mm pitch with hole for 5mm shaft, for clamping of full grain. Suitable for being ..
Cod: 7350-PUL21T5Z
Price 4.20€
Heated Kapton pad 5x10 cm
5V kapton pad with adhesive sheet to use with your 3D printer or 3Drag choco extruder Size (cm): 10..
Cod: 7350-COM11288
Price 6.50€
Teflon cylinder for 3Drag extruder
Teflon cylinder for 3Drag extruder ..
Cod: 8220-7350-EXT8200FG
Price 8.20€
Blue tape for 3d printer
Roll of blue tape ideal for printing with ABS and PLA and to improve the adhesion of the printing pl..
Cod: 7350-BLUTAPE3M
Price 21.35€
Kapton tape - 200MM/30M
Roll of Kapton tape, 200 mm high and 30 meters long. Used as thermal insulation (from -269 ° C t..
Cod: 7350-KAPTON20030
Price 23.00€