Press-n-peel is designed to be used in conjunction with a laser printer or photocopier. The required layout is simply printed onto the sheet then transferred from the sheet onto a copper clad board. Ideal for schools, universities and hobbyists. No need for a UV light source. Packaging: 5 pieces, dimensions single PnP: 21,6 x 28,4 cm.
How to
	1 Draw the project and its Master using any CAD software

	2 Photocopy or Laser Print circuit image onto the dull side (emulsion) of Press-n-Peel Image Transfer Film
	3 Cut Press-n-Peel, leaving a 1/4" border around the circuit image
	4 Clean the copper base with alcohol.
	5 Place Press-n-Peel with image face down onto clean copper board
	6 Iron the Press-n-Peel Film to the board a peice of plain paper between the iron and the film to reduce friction. Temperature setting on the iron is critical, and dependant upon your laser printer or photocopier. Suggested starting temperature is 275-325 degrees F. Iron setting is generally "polyester". Iron temperatures vary. Iron until board has completely and fully reached the temperature of the iron. Time varies with the size and thickness of the board. Generally this is 1.5 to 10 min. DO NOT USE THE STEAM SETTING!
	7 Let to cool and remove the PnP from base copper.
	8 Plunge the base in acid to corrode the excess copper
	9 What you get
	10 Clean using nitro diluent
	11 Check for any short circuit due to a non perfectly uniform corrosion