Portable two-channel digital oscilloscope with the multimeter in one instrument. It features a large 2.8-inch colour TFT LCD display with a resolution of 320x240 pixels, built-in rechargeable battery, 40 MHz bandwidth, 250 MSa/s single-channel real-time sampling rate, intelligent battery charge control (after each 2-hour recharge, the device can be used continuously for an entire day or on standby for more than two months), auto-calibration function. The multimeter provides measurements of DC and AC voltage, DC and AC current, resistance, capacitance, diode test and continuity. PC software (downloadable) supports Windows 7 / 8 / 10 32-bit and 64-bit.  Power supply via batteries or mains adapter.
 

• Number of Channels: 2
• Bandwidth: 40 MHz
• Horizontal
  - SEC/DIV Range: 5 ns/div~500 s/div 1, 2, 5 sequence
  - Real-time sampling rate: 250 MSa/s (single channel), 125 MSa/s (two channels)
  - Waveform interpolation: (sin x) / x
  - Record Length: Max. 6K for single channel; 3K for two channels
• Vertical
  - A/D Converter: 8 bit resolution, each channel sampled simultaneously
  - VOLTS/DIV Range: 10 mV/div~10 V/div BNC input
  - Bandwidth limit: 20 MHz typical
  - Low frequency response (-3db): ≤10Hz
  - Rise Time on BNC, typical: ≤5ns
  - DC Gain Accuracy: ± 3% for Normal or Average acquisition mode, 10 V/div to 10 mV/div
• Acquisition: Normal
• Trigger
  - Type: Edge
  - Modes: Auto, Normal, Single
  - Level: ± 4 divisions from centre of screen
  - Trigger Level Accuracy: 0.2div × volt/div within ± 4 divisions from centre of screen
  - Slope: Rising, Falling, Rising & Falling
  - Source: CH1/CH2
• Input:
  - Coupling: DC, AC or GND
  - Input impedance, DC coupled: 25pF±3 pF, 1MΩ±2%
  - Probe attenuation: 1X, 10X
  - Probe attenuation factors supported: 1X, 10X, 100X, 1000X
  - Maximum input voltage: 150VRMS
• Measurements
  - Cursor: the difference between voltage sliders: △V / difference between Time sliders: △T
  - Automatic measurements: frequency, amplitude

• Multimeter (DMM):
  - Maximum display indication: 4000
  - Direct voltage: 400 mV / 4 V / 40 V / 400 V / 600 V
  - Alternating voltage: 4 V / 40 V / 400 V / 600 V
  - Continuous current: 40 mA / 200 mA / 4 A / 10 A
  - Alternating current: 40 mA / 400 mA / 4 A / 10 A
  - Resistance: 400 / 4 k / 60 k / 400 k / 4 Mega / 40 Mega 
  - Capacitance: 40 nF / 400 nF / 4 µF / 40 µF / 100 µF

• General Features
  -  Maximum display: 4000
  - Auto Range
  - Diode Test: Yes
  - Continuity Buzzer
  - Display: 2.8 inch TFT 64,000 colours, Resolution: 320x240 pixels, Contrast: Adjustable
  - Low battery indication
  - USB interface
  - Input impedance for: approx. 10 MΩ
  - Power supply: 2 rechargeable lithium batteries (18650 2600 mA - included) / mains adapter 230 VAC - 5 VDC - 2 A
  - Power consumption: <2.5 watts
  - Protection: 3A fuse
  - Working temperature: 0°C to +50°C
  - Weight: 624 grams
  - Casing colour: black
  - Dimensions (mm): 199x98x40 (L x W x H)
  - Weight: 624 g
   

• Accessories:
  - Mains adapter 230 VAC - 5 VDC - 2 A
  - Test leads
  - 2 Clip-on probes
  - USB-USB type C cable
  - BNC probe
  - Carrying case
  - Manual in English

• http://www.hantek.com/