The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.







  • Peak - Components analyzer
With LCD display, this device is able to analyze a large number of electronic components such as bipolar transistors, MOSFET, SCR, triac, diodes, diode networks, the junction of FETs (only identified as the pin gate), LED, LED two-color and RGB. automatically identifies the type of component and the pinout, show the special information of the component as protection diodes and shunt resistors, information of parameters such as the gain and the leakage current in the transistor, the gate threshold voltages of the MOSFETs, the falls of voltage, etc. It has manual and automatic switch-off (turns off automatically when the device is idle for more than 30 seconds). Battery powered: 12 V (included). Dimensions: 103x70x20 mm. The package includes: the component analyzer, the three test leads and instructions.
 
 
 
 
 
TECHNICAL SPECIFICATIONS

Short-circuit test current (Isc): min. -5.5 MA ~ max. 5.5 mA
Open circuit test voltage (Voc): min. -5,1V ~ Max. 5.1V
Bipolar Transistors (BJT):
- Measurable gain (Hfe): 4 to 65000
- Gain accuracy: about 3% of reading - about 5 Hfe
- Vceo test: min. 2 V ~ max. 3 V
- Vbe precision: -2% -20mV ~ + 2% +20 mV
- VBE for Darlington (shunted): ~ 0,95V 1,80V (~ 0,75V 1,80V)
- Base-emitter shunt: 50 kohms ~ 70 kohms
- Collector test current: min. 2.45 mA ~ max. 2.55 mA
- Leakage 0.7 mA
MOSFET:
- Gate threshold range: min. ~ 0.1V max. 5V
- Threshold accuracy: -2% + 2% + -20mV ~ 20mV
- Drain test current: 2.45 mA ~ 255 mA
- Gate resistance: 8 Ohms
- Drain test current: 4.5 mA
- Source-drain JFET test current: min. ~ 0.5 mA max. 5.5 mA
SCR / Triac:
- Gate test current: 4.5 mA
- Load test current: 5 mA
Diodes:
- Test current: 5 mA
- Precision voltage: -20mV ~ -2% + 2% + 20mV
- VF for LED identification: min. 1.5 V ~ max. 4 V
- Short-circuit threshold: 10 Ohm
Battery (included):
- Type: MN21 / L1028 / 12V alkaline GP23A
- Voltage: min. 7.50 V - 12 V typical
Dimensions: 103x70x20 mm

Write a review

Please login or register to review

Peak - Components analyzer

  • Price: 67.00€


Tags: ANALYZER, COMPONENTS, DCA55, MOSFET, SCR, triac, diodes, diode networks

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.