The DS1101GD is a compact BASIC programmable controller based on microcontroller T1000 high-performance ASIC to 88 MHz, it is particularly suitable for serial control applications and serial-over-IP. It has a single DB9M connector that includes an RS232 port to 3.5 channels, eight status LEDs, a buzzer, a Wi-Fi and a monochrome OLED display that displays the IP address, messages, icons, information status, etc. Another of DS1101GD feature is that its software controls the power on pin 9 of the DB9 connector, allowing you to feed a serial device connected directly. DS1101GD the same can be supplied via the pin 9. It has eight status LEDs on top of the device and a buzzer. The device comes with a serial-over-IP application preloaded and fully functional, a DIN rail and a mounting plate to the wall.
* The Wi-Fi and PoE options are mutually exclusive and can not be installed simultaneously.
Programmable
Ready to Go
Feature-rich, easy to learn, the Tibbo BASIC language opens up a world of programming possibilities.
Control serial devices. Collect, store and manage data. Communicate with AggreGate Server
Use the serial-over-IP application preloaded and
fully functioning, or download one of the free apps ready to use
Valutazione
Performance
The DS1100 is a compact BASIC-programmable controller
entry-level
It equipped with an RS232 port to single channel
The DS1101 and DS1102 devices are very
powerful and versatile.
You can have them with additional functions such as
Wi-Fi interface 802.11b/g, OLED display, Power-over-Ethernet and different configurations of serial ports
Guida DIN
Fissaggio a muro
Including a mounting bracket for DIN rail
Including a mounting bracket for DIN rail
Serial
Wi-Fi
Display
PoE
The DS1100 has RS232, RS232 to the DS1100 and DS1102 3.5-channel universal RS232/422/485.
Equip your DS1101 or DS1102 with Wi-Fi module
Additional GA1000.
It supports the 802.11b/g standards and security protocols WPA and WPA2.
96x32 OLED display is very useful, allows you to view messages, icons, status information, etc.
For inspiration, see how the display in the application serial-over-IP is used.
Feed your DS110x directly through the Ethernet cable! Compatible with a wide range of PoE hub and "power inserters."
Note: PoE and Wi-Fi are mutually exclusive
Specifications Tibbo DS1101GD
Microcontroller: T1000 ASIC to 88 MHz
Ethernet: 10 / 100BaseT auto-MDIX
Power-over-Ethernet: no
WiFi: Yes, it supports the 802.11b / g standards and security protocols WPA and WPA2
96x32 OLED display: allows you to view messages, icons, status information, etc.
RS232 port to 3.5 channels of DB9M connector:
- Baud rate up to 921,600 bps
- Lines TX, RX, RTS, CTS, DTR, DSR and DCD
- None / even / odd / Mark / Space parity modes
- 7.8 bits / character modes
- Flow control RTS / CTS option
- Input 12 V available on pin 9 of the DB9 connector
Flash memory: up to 1024 kB for firmware and application
EEPROM: 2 kB for storing data
Eight status LED on the top of the device:
- LED green and red status
- Yellow LED status Ethernet
- 5 blue LED (used for the indication of the Wi-Fi signal strength)
Buzzer: yes
Power supply: 12 Vdc (min. 9 V - max. 18V)
External dimensions: 90 x 48 x 25 mm
Firmware: upgradeable through the serial port or via network
Operating temperature: from -5 ° C to + 70 ° C
Certifications: CE and FCC
Included accessories: Mounting bracket for DIN rail and bracket for wall mounting
DS1100GD with DIN rail and bracket for wall mounting
BASIC PROGRAMMABLE CONTROLLER WITH WI-FI AND DISPLAY
