Switching power supply with high efficiency, long life and high reliability. Case in metal made, cooling by free air convection. LED indicator for power on, overload protection , overvoltage and overtemperature. This device must be installed by a qualified person.
Features
universal AC input / full range
cooling: by free air convection
LED indicator for power on
100 % full load burn-in test
withstands 300 VAC surge input for 5 seconds
high operating temperature up to 70 °C
withstands 5G vibration test
no load power consumption < 0.3 W
high efficiency, long life and high reliability
protection against: short circuit / overload / overvoltage
miniature size and 1U low profile
operating altitude up to 5000 m
for professional use only
This device must be installed by a qualified person.
Specification
Output:
DC voltage: 12 V
rated current: 8.5 A
current range: 0-8.5 A
rated power: 102 W
ripple & noise (max.): 120 mVp-p
voltage adj. range: 10.2-13.8 V
voltage tolerance: ± 1.0 %
line regulation: ± 0.5 %
load regulation: ± 0.5 %
setup, rise time:
500 ms, 30 ms / 230 VAC
500 ms, 30 ms / 115 VAC at full load
hold up time (typ.):
55 ms / 230 VAC
10 ms / 115 VAC at full load
Input:
voltage range:
85-264 VAC
120-373 VDC
withstands 300 VAC surge for 5 s
frequency range: 47-63 Hz
efficiency (typ.): 88 %
AC current (typ.):
1.9 A / 115 VAC
1.2 A / 230 VAC
inrush current (typ.): cold start 50 A / 230 VAC
leakage current: < 0.75 mA / 240 VAC
Protection:
overload:
110-150 % rated output power
protection type: hiccup mode, recovers automatically after fault condition is removed
overvoltage:
13.8-16.2 V
protection type: shut down o/p voltage, re-power on to recover
Environment:
operating temperature: -30 to +70 °C
operating humidity: 20-90 % RH non-condensing
storage: -40 to +85 °C, 10-95 % RH
temperature coefficient: ± 0.03 %/°C (0-50 °C)
vibration: 10-500 Hz, 5G 10 min/1 cycle, period for 60 min each along X, Y, Z axes
