- Sampling rate (real time): 1GS / s
Acquisition Mode: Normal, Average and Peak
- Input Coupling: AC, DC, GND
- Input Impedance: 1 M ohm ± 2% ± 20pF 3pF
- Probe Attenuation 1X, 10X
- Probe attenuation factor supported: 1X, 10X, 100X, 1000X
- Maximum Input Voltage CAT I and CAT II 300 VRMS (10 ×), Installation Category; CAT III: 150VRMS (1 ×).
- Sample Rate Range: 500 MSa / s - 1GS / s
- Interpolation Waveform (sin x) / x
- Record Length: 40 KB
- SEC / DIV Range: 4 ns / div to 40 s / div
- Sampling rate and delay time accuracy: ± 50 ppm
- Position Range: 20ns / div to 80US / div; (-8div X s / div) to 40ms; 200us / div to 40s / div; (-8div X s / div) to 400s
- Delta Time Measurement Accuracy (Full Bandwidth) Single-shot, Normal mode: ± (1 sample interval + 100ppm × reading + 0.6ns); > 16 averages: ± (1 sample interval + 100ppm × reading + 0.4ns); Sample interval = s / div to 200
- Vertical Resolution: 8-bit resolution, all channels sampled simultaneously
- Position Range: 2 mV / div to 200 mV / div, ± 2V / 200 mV / div to 5V / div, ± 50V
- Bandwidth: 70 MHz
- Rise Time at BNC (typical): 5ns
- Analog bandwidth in normal mode and media to BNC or probe, DC Coupled: 2 mV / div to 20 mV / div, ± 400 mV; 50 mV / div to 200 mV / div, 2V ± 500 mV / div to 2V / div, ± 40V; 5V / div, ± 50V
- Math: +, -, *, /, FFT
- FFT: Windows: Hanning, Flatop, Rectangular, Bartlett, Blackman; 1024 sample point
- Bandwidth Limit: 20 MHz
- Low Frequency Response (-3db): = 10 Hz at BNC
- DC gain accuracy: ± 3% for the acquisition mode Normal or average, 5V / div to 10 mV / div; ± 4% for the acquisition mode Normal or average, 5 mV / div at 2 mV / div
- Precision DC, Average Acquisition Mode: when the vertical displacement is zero and N = 16: ± (3% × reading + 0.1div + 1 mV) only 10mV / div or greater is selected; When the vertical displacement is not zero and N = 16: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2 mV for settings from 2 mV / div to 200 mV / div; add 50 mV for settings from 200 mV / div to 5 V / div
- Repeatability of voltage measurements
- Trigger type: Edge, Video, Pulse, Slope, Over time, Alternatives
- Trigger source: CH1, CH2, EXT, EXT / 5 AC Line
- Trigger Mode: Auto, Normal, Single
- Type of coupling: DC, AC, Noise Reject, HF Reject, LF Reject
- Sensitivity of Trigger (Edge Trigger Type): DC (CH1, CH2): 1div from DC to 10 MHz; 1.5div from 10 MHz to 100 MHz; 2div from 100 MHz to Full; DC (EXT): 200 mV from DC to 100 MHz; 350 mV from 100 MHz to 200 MHz; DC (EXT / 5): 1V from DC to 100 MHz; 1.75V from 100 MHz to 200 MHz; AC: attenuates signals below 10 Hz; HF Reject: attenuates signals above 80 kHz; LF Reject: attenuates signals below 150 kHz
- Trigger Level Range: CH1 / CH2: ± 8 divisions from center of the screen; EXT: ± 1.2V; EXT / 5: ± 6V
- Accuracy Trigger Level (typical) Accuracy is for signals with fast Rise and Fall = 20 ns: CH1 / CH2: 0.2div × volts / div within ± 4 divisions from the center of the screen; EXT: ± (6% of setting + 40mV); EXT / 5: ± (6% of setting + 200mV);
- Level of 50% (typical): Operates with input = 50 Hz
- Cursor measurement: Voltage difference between cursors: Difference between cursors Delta V / time: Delta T / Delta Reciprocal of T in Hertz (1 / Delta T)
- Automatic measurement: Frequency, Period, Average, Peak to Peak, RMS Cycles, Minimum, Maximum, Rise Time, Fall Time, + Pulse Width, -pulse Width, Delay1-2Fall, + Duty, -duty, Vbase, Vtop, VMID , Vamp, Overshoot, Preshoot, preiod Mean, RMS preiod, FOVShoot, RPREShoot, bWidth, FF, FFR, LRR, LRF, LFR, LFF
- TFT 7 "64,000 colors
- Resolution: 800x480
- Contrast: Adjustable with progress bar
- Output Voltage (typical): about 5 Vpp with 1 M ohm load
- Frequency (typical): 1 kHz
- Power supply: 120-240 VAC RMS (± 10%), 45Hz to 66Hz
- Power consumption: <30W
- Fuse: 2 A, T rating, 250 V
- Operating Temperature: 0 ° C to + 50 ° C
- Cooling Method: Convection
- Humidity: (40 ° C or lower): = 90% relative humidity; (41 ° C to + 50 ° C): = 60% relative humidity
- Altitude: Operating: under 3,000 m (10,000 ft); Not Operating Under 15,000 m (50,000 feet)
- Dimensions (mm): 385x200x245
- Weight: 3.5 kg (with packaging); 2.08 kg (without packaging)
|