GPS tracker 4G model ML300G with IP65 protection rating, ideal for real-time monitoring of vehicles and people via web browser or free APP. Installation is very simple: just insert a Nano SIM Card (not included) into the dedicated slot, turn on the tracker, register on the web portal https://www.micodus.net/ or on the APP, and start viewing movements. It features a powerful magnet for easy and immediate attachment. It also works on 2G/3G networks.
The web platform and the app allow the management of multiple devices (fleet) or a single device. See the section on registering a new account.
The device integrates a 2500mAh lithium-ion battery, offering up to 6 days of autonomy in normal operating mode and up to 20 days in hibernation mode. This means the device can operate for a long time without needing to be recharged. Additionally, it has been designed with an IP65 protection rating, making it resistant to water splashes and dust.
The tracker has multiple functions:
- Overspeed alarm function, which notifies the user when the vehicle exceeds the preset speed.
- Geo-fence function, which allows setting a virtual zone on the map and receiving a notification when the vehicle exits or enters that area.
- Vibration alarm function, which automatically detects accidents or vehicle damage thanks to the integrated 3D acceleration sensor.
- Voice monitor function, the device integrates a high-sensitivity microphone that allows environmental listening near the device. This means the user can listen to real-time audio when needed. This function is available on 4G networks via VoLTE technology.
- Movement alarm function, which allows receiving an alert when the vehicle, where the device is placed, is moving. This means the user can be immediately alerted in case of theft or unauthorized vehicle movements.
- Historical route playback function, which allows storing the last 6 months of movements, with the possibility of searching by date and viewing them on the map.
- Blind Network with memory function, which allows saving 5000 coordinate points in case of internet network loss. The saved coordinates will be automatically uploaded once network coverage is available again.
- Low battery alarm, the tracker sends an alarm via APP or WEB platform in case of low battery.
Important! To use the Voice monitor function, a SIM card with data and voice traffic compatible with VoLTE technology is required. Please ensure, by contacting your mobile operator, that this technology is available for the SIM in use. Without this service, environmental listening over the 4G network will not be possible.
It does not have an SOS alarm button.
|
- Weight: 87g
- Dimensions: 78mm(L) * 53mm(W) * 14mm(H)
- Battery charging time: approximately 4 hours
- Battery life:
- 4-6 days in tracking mode with 1-minute intervals
- 7-10 days in power-saving mode
- 15-20 days in hibernation mode
- Operating voltage: 3.4Vdc ~ 4.5Vdc
- Average power consumption: 55mA
- Power consumption in standby mode: less than 6mA
- Battery capacity: Lithium-ion 3.7V 2500mAh
- Operating temperature: -20°C ~ +55°C
- Ambient operating humidity: 10%-85% RH (non-condensing)
- Operating frequency: 4G LTE-FDD + 2G GSM/EDGE
- SIM Card: Nano SIM Card (VoLTE-enabled)
- Magnetic mounting: Yes
- Cellular antenna: Integrated into the device
- Positioning detection: GNSS + AGPS + LBS
- GNSS (Global Navigation Satellite System): Includes GPS, GLONASS, and Galileo, using satellite constellations to calculate the device's position.
- AGPS (Assisted GPS): Uses additional network-provided information to speed up satellite signal acquisition and improve location accuracy.
- LBS (Location-Based Services): Utilizes GPS, Wi-Fi, and cellular networks for navigation, asset tracking, and location-based features.
- GNSS antenna: Integrated into the device
- Time required for startup position acquisition: ≤ 32 seconds
- Hot start: ≤ 1 second
- Tracking sensitivity: –162 dBm
- GPS channels: 32
|
The micodus.net web platform and the associated free app allow you to efficiently manage both a single GPS device and a fleet of devices. Thanks to these solutions, it is possible to monitor the location and activities of multiple devices in real-time, offering complete control over your fleet.
To use the platform and the app, registration is required.
If you want to manage a fleet, you need to register all the devices to be tracked via IMEI/ID, then create an account using a Username and Password, and subsequently add the trackers created earlier.
If you prefer to manage a single device, simply register by entering the device's IMEI/ID code and a Password.
|