This demoboard for ESP03 is composed of a USB / Serial converter, from a WiFi module and a power supply section. Via the USB connection, you can feed the demoboard and load in flash memory module that will run the program.

The ESP03 is composed of a radio part and integrates a programmable microcontroller thanks to which it is possible to create WiFi applications in a simple way and with a reduced number of components. To facilitate the planning, this module has been made compatible with the Arduino IDE and then programmed from this.

N.B .: The product is supplied fully assembled, with the exception of the ESP module and the strips males, which must be assembled by the end user. It comes complete with the ESP03 form.

Programming of DemoBoard

The programming of demoboard can occur in three ways.

The first solution is to use the project NodeMCU whose reference site (in Chinese but with options in English) is http://nodemcu.com/index_cn.html.

The project springs and all the related files have been available at the site: https://github.com/nodemcu/ nodemcu-firmware and https://github.com/nodemcu/nodemcu-flasher.

The second solution is called by the application and can be downloaded at esplorer https://github.com/4refr0nt/ESPlorer/.

The third mode uses the Arduino IDE downloadable from https://www.arduino.cc site. Board Manager by adding the ESP8266 board you can program our demoboard directly from the IDE.

SOFTWARE standalone

Features ESP-03 card