Compact audio Class D amplifier 100+100 watt (music) based on the integrated TDA7498 operating at a single power supply (between 12 and 36 volt) and can drive two passive speakers with 4 and 8 ohm impedance. The front has a large knob with on/off switch function and volume control via a digital potentiometer, a 3.5 mm jack for headphone listening, a 3.5 mm jack for input audio, a receiver for IR remote control (not included). On the rear panel are the connectors for the left and right speakers, the DC jack for power, stereo audio input (RCA) and an output to the sub woofer. It is supplied fully assembled in a compact container made of aluminum alloy. It can be used to amplify the audio outputs for home theater, DVD systems, MP3, etc. Dimensions (mm): 180 (length) x 120 (width) x 45 (height).

• Power supply: 12V dc to 36 Vdc
• Max 200 watt @ 6 Ohm: 7.75 A
• Efficiency 100 watt @ 6 Ohm: 86-91%
• Gain (max volume): 43 dB
• Input sensitivity (RMS):
  - @ 6 Ohm, 100 W, 1 kHz, 3.5mm - 294 - V
  - @ 6 Ohm, 100 W, 1 kHz, RCA - 496 - V
• Input impedance RCA / 3.5 mm: 19 kohm
• Output Power:
  - @ 6 Ohm, THD+N 1% - 82 - W
  - @ 6 Ohm, THD+N 10% - 100 - W
• Supported sampling frequency: 32, 44.1, 48, 88.2 and 96 kHz
• Bandwidth @ ± 3dB (@ 6 ohms): min. 20 - max 20 kHz
• THD:
  - @ 6Ohm, 1W, 1KHz, 3.5mm - 0.05 - %
  - @ 6Ohm, 1W, 1KHz, RCA - 0.042 - %
• Output noise level (A-weighting, Input Connected to GND): 620 microvolt
• SNR (@ 82W 6 Ohm, 1% THD + N, RCA Input): 82 dB
• Case: anodized aluminum
• Dimensions (mm): 180 (length) x 120 (width) x 45 (height)
• Weight: about 800 grams