Digital Multimeter CAT. III 500 V, with backlight LCD display 3 1/2 digit. It allows of measuring DC currents up to 10 A, DC and AC voltages up to 500 V, up to 2 Mohm resistors, diodes, transistors and electrical continuity. It has automatic polarity detection and low battery indication. Powered by CR2032 battery (included). Complete with protective shell and removable tips.

• CAT II 500V / CAT III 300V
• automatic polarity indication
• automatic zero adjustment
• voltage measurements: 500 VAC and 500 VDC max.
• current measurements: DC 10 A max.
• resistance measurements: 2 MOhm
• with separate test leads (incl.): TLM71
• pollution degree 2
• Important safety information

• DC voltage: 0-200 mV / 2000 mV / 20 V / 200 V / 500 V
  • basic accuracy: ± (1.0% rdg + 2 digits) , ± (1.2% rdg + 2 digits) for 500 V range
  • input impedance: 1 MOhm
  • overload protection: 500 V DC or AC rms
• AC voltage: 0-200 V / 500 V
  • basic accuracy: ± (1.5% rdg + 3 digits)
  • input impedance: 450 kOhm
  • frequency range: 40-500 Hz
  • maximum input: 500V DC or AC rms
• DC current: 200 µA / 2000 µA / 20 mA / 200 mA / 10 A
  • basic accuracy: ± (1.5% rdg + 2 digits), ± (2.0% rdg + 2 digits) for 200mA range; ± (2.0 % rdg + 3 digits) for 10 range
  • overload protection: 0.5 A / 500 V fuse for mA range; 10 A / 500 V for 10 A range
• resistance: 0-200 Ohm / 2000 Ohm / 20k Ohm / 200 kOhm / 2000 kOhm
  • basic accuracy: ± ( 1.0% rdg +3 digits); ± (1.0% rdg + 5 digits) for 200 Ohm range, ± (1.5% rdg + 3 digits) for 2 MOhm range
  • overload protection: 0.5 A / 500 V fuse
• battery test: 1.5 V / 9 V
  • basic accuracy: ± (5.0% rdg + 5 digits)
  • overload protection: 0.5 A / 500 V fuse
• audible continuity measurement: built-in buzzer sounds if resistance is less than 50 Ohm
  • test voltage: approx. 1.8 V
• diode measurement: test forward voltage of diode
  • test voltage: approx. 1.8 V
• overrange: yes
• continuity buzzer: yes
• diode test: yes
• low-battery indication: yes
• maximum display: 3 1/2
• LCD display:
  • size: 47 x 15 mm
  • digits: max. 1999
• ranging mode: manual
• data hold: yes
• backlight: yes
• dimensions: 74 x 30 x 125 mm
• weight (with battery): 100 g
• power supply: 1 x CR2032 (incl.)
• auto power-off: no
• operating environment:
  • temperature: 0 °C to 40 °C (32 to 104 °F)
  • humidity: < 80% RH
• storage environment:
  • temperature: -20 °C to 60 °C (-4 to 140 °F)
  • humidity: < 90% RH
• fuse:
  • F0.5 A / 500 V 5 x 20 mm
  • F10A / 500 V 5 x 20 mm
• test lead probe : CAT II 1000 V / CAT III 600 V, 10 A, L = 75 cm