Experimental board made specifically to be mounted on the Raspberry Pi board (model B rev.2) through which it is possible to test own applications without having to build a separate printed circuit board. The protoboard is equipped with 26-pin connector (M/F), which fits perfectly to the GPIO connector on this Raspberry and enables sandwich installation of an additional board (such as LCD board). Four of the eight screw terminals may be used at will by the user while the remaining 4 are directly connected to the supply lines (3V3, 5V) and ground (GND). All other GPIO lines of the 26-pin connector are connected to male pin strip with 2.54mm pitch. The board (measuring 86x56x26 mm) also provides the possibility of mounting chips SOL18 and SOJ18  (which are headed pin to 2x9-pin male strip) and of different pitches with which the user can make the connections provided for their applications.

This project comes in kit. Some components have to be soldered to the included PCB.

The package includes:
1 - PCB
1 - M3 bolt,
1 - spacer hex male/female 18 mm
1 -  metal nut 3MA
1 - 2x13 pin female connector
1 - male strip connector 40-pin 2.54 mm
1 - male strip connector 4-pin 2,54 mm
4 - screw terminals 2 pole 5 mm pitch