The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.







Arduino MKR WIFI 1010 is designed to quickly and easily add Wi-Fi connectivity to any Arduino MKR based application.

The board is composed of three main blocks:

  • SAMD21 Cortex-M0+ 32bit Low Power ARM MCU;
  • U-BLOX NINA-W10 Series Low Power 2.4GHz IEEE® 802.11 b/g/n Wi-Fi; and
  • ECC508 Crypto Authentication. (datasheet)

The USB port of the MKR WIFI 1010 can be used to supply power (5V) to the board.
It has a Li-Po charging circuit that allows the Arduino MKR WIFI 1010 to run on battery power or an external 5 volt source, charging the Li-Po battery while running on external power.
Switching from one source to the other is done automatically.
 

Warning: Unlike most Arduino boards, the MKR WIFI 1010 runs at 3.3V.
The maximum voltage that the I/O pins can tolerate is 3.3V.
Applying voltages higher than 3.3V to any I/O pin could damage the board.
While output to 5V digital devices is possible, bidirectional communication with 5V devices needs proper level shifting.

 

Features
 

 

  • U-BLOX NINA-W10 Series Low Power 2.4GHz IEEE® 802.11 b/g/n Wi-Fi Module
  • Microchip Technology SAMD21 Cortex-M0+ 32bit Low Power ARM MCU
  • ECC508 CryptoAuthentication IC
  • Operating Voltage: 3.3V
  • Full-Speed USB Device and embedded Host
  • Interfaces: I2S, I2C, UART, SPI
  • Pinout (Digital, PWM, Analog): 22 I/O Digital (12 PWM), 7 Analog input
  • Form factor: 67.64mm × 25.00mm MKR

 

 
Documentations
 

Write a review

Please login or register to review

Arduino MKR WIFI 1010

  • Price: 27.00€


  • 5 or more 26.00€
  • 10 or more 24.00€

Tags: Arduino, MKR, WIFI

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.