Breakout board compatible with the XBee format and equipped with the HC-05 Bluetooth module. It is particularly suitable for use with the "Bluetooth Shield" (not included - see related products) specially designed to accommodate three different types of Bluetooth modules (HC-05, BLECC2541, BLE40).
Breakout board dimensions with bluetooth a module (mm): 33x25x10.
N.B. the "Bluetooth Shield" is not included, see related products.
Technical specifications of the HC-05 module
The HC-05 is a Bluetooth module (SMD) that uses the BlueCore4 CSR chipsets. It has 7 I / O ports, 8 Mbit of Flash memory for software storage and two modes of operation: through AT commands and in transparent mode.
In transparent mode, it can be configured as a Master, Slave or Loopback, and can connect to other devices that support the SPP protocol.
In the AT command mode, the user can configure the module and send commands.
By checking the logic level of the PIO11 pin, the user can activate the working mode between AT and transparent command.
USB protocol: V 1.1 / 2.0
Frequency: 2.4 GHz ISM band
Modulation: GFSK (Gaussian Frequency Shift Keying)
Transmission power: about 4dBm, Class 2
Sensitivity (BER): approximately -84dBm
Max. Serial baud rate: 1382400bps, support for hardware flow control transfer
Rate:
- Asynchronous: 2.1 Mbps (Max) / 160 kbps
- Synchronous: 1 Mbps / 1 Mbps
Security: Authentication and encryption
Support profiles: Bluetooth serial port (master & slave)