Equipped with rotary encoder, LCD display and SD card slot card, this card allows you to control the 3Drag/K8200 3D printer and print without using a computer. You can see in real time, temperature, acceleration, velocity, flow rate, preheating, locking and releasing of the motors, positioning of the floor or the extruder. The board is powered directly from the controller board

This system has no need of a PC, and makes the 3D printer 3Drag a printer independent.

 

This system can be use also with a Sanguinololu board, but you need to change the microcontroller.

 

Specifications:
• 4 x 20 character LCD display with backlight.
• Dimensions: 80 x 50 x 45 mm / 3.15 x 1.96 x 1.77”

Features:
• Prints .GCODE files that are saved on a regular SD-Card (SD-Card not included).
• Encoder based control.
• Real time temperature display and control of the extruder and heated bed temperature.
• Connected to the 3D printer controller board with the included flat cable, no extra power supply needed.
• Enclosure .STL file available. 
• Fully assembled and tested unit (Connection cable requires soldering).
• SD-Card Slot
• Reset button