The kit includes all the material required to change the printer mechanically 3Drag and obtain a larger size. Due to this modification will be possible to print objects with dimensions up to a maximum of 400x200x200mm (superior to those offered by the standard version equal to 200x200x200mm), such as for example prototypes of shoes, hulls for ship models, models, models for architecture, etc. The modification consists in replacing the 2 side profiles of the base of the frame with others of greater length (850mm), the two steel bars rectified Ø10mm X axis with other 2 having a length of 797mm, the belt X-axis with a long 1.5m and the plate with one having a size of 405x205mm.

• 2 aluminum profiles framework 27,5x27,5 mm 850 mm
• 1 flat 2mm aluminum 405x205mm with long sides at 90 °
• 2 bars of ground steel Ø10mm l = 797mm
• 1 flat cable 16-way colored by 300 cm (cod. FC16C-3 / SP)
• 15 plastic cable ties 2,5x100 mm (cod. ECTB100)
• 10 plastic cable ties 4,8x200 mm (cod. ECTB200)
• 1 belt 6T5 L = 1500 mm (BELT6T5 / 1500 / SP)
• 1 toothed washer M5 galvanized (x support limit X)
• 4 lock washer M3 galvanized (x switch fixing X)
• 1 Allen bolt M5x12 galvanized (x support limit X)
• 2 Allen bolt M3x16 galvanized (x switch fixing X)
• 2 galvanized nut M3 (x limit X)
• 1 square nut M5 8x8x4 mm (x support limit)
• 1 support PLA black for switch fixing X-axis (3D) Support switch X