The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.







Accessories

Accessories


Product Compare (0)


Magnetic Heated bed Sticker Flexible

Magnetic Heated bed Sticker Flexible

The magnetic plate for 3D printer (with 200x200 mm printing plate) is composed of t..

Cod: 1606-HS1686
Price 11.00€

Plexiglass box for 3D4040 printer

Plexiglass box for 3D4040 printer

Box for 3D4040 printer in KIT ideal for protecting the machine from drafts tha..

Cod: 7350-BOX3D4040
Price 183.00€

Filament monitoring trigger for 3D printer- 1.75 mm

Filament monitoring trigger for 3D printer- 1.75 mm

It consists of a micro switch and a status LED, this small module is suitable for u..

Cod: 8300-YB785175MM
Price 6.60€

Filament monitoring trigger for 3D printer- 3 mm

Filament monitoring trigger for 3D printer- 3 mm

It consists of a micro switch and a status LED, this small module is suitable for u..

Cod: 8300-YB7853MM
Price 6.60€

Silicone rubber heating mat 3M 20x20 cm 12V 200W

Silicone rubber heating mat 3M 20x20 cm 12V 200W

Heating mat to apply, using the 3M adhesive it has, under the glass plate of the 3D..

Cod: 2846-KA12V200W
Price 19.50€

Heater 12V 40W

Heater 12V 40W

Heater for extruder body of 3D printer (DMAKE and 3D4040 – see related products) . P..

Cod: 1606-RISC12V40W
Price 4.00€

3D Printer Heated Bed Power Module

3D Printer Heated Bed Power Module

If the high current of the hotbed brings multiple problems to your mainboard, this ..

Cod: 7100-FT1357K
Price 14.00€

MICRO SWITCH WITH LEFT 50 MM

MICRO SWITCH WITH LEFT 50 MM

Micro switch with 50 mm long metal lever. It has a normally open contact and one normall..

Cod: 7300-MSWITCH50MM
Price 1.80€

BuildTak for DMAKE printer

BuildTak for DMAKE printer

BuildTak is a thin sheet of adhesive plastic that provides an optimum print surface and allows to at..

Cod: 6968-BUILDTAKDMAKE
Price 9.84€

Aluminum heated plate for DMAKE printer  - KIT

Aluminum heated plate for DMAKE printer - KIT

Aluminum made with 3 mm thickness, this heated plate is able to achieve a temperature greater than 1..

Cod: 7350-RISPLATEDMAKE
Price 27.79€

4 Metal clip for flat glass printing

4 Metal clip for flat glass printing

Set containing 4 metal clips shown to attach the glass panel to the 3Drag printer. Dimensions (mm): ..

Cod: 2846-CLIP3DPLATE
Price 1.64€

Minishredder for PLA/ABS - to mount

Minishredder for PLA/ABS - to mount

Manual minishredder with frame and blades made of stainless steel AISI 304. It..

Cod: 7350-MINITRITURATORE
Price 368.00€

Glass panel for 3DRAG printer

Glass panel for 3DRAG printer

Made of tempered glass of 3 mm thickness, this pan..

Cod: 8220-GP8200
Price 7.80€

DRV8825 Stepper Motor Driver Carrier, 2,2A

DRV8825 Stepper Motor Driver Carrier, 2,2A

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping b..

Cod: 8218-DRV8825
Price 7.00€

Toothed rubber belt - 1.5 meters

Toothed rubber belt - 1.5 meters

Toothed rubber belt - 1.5 meters ..

Cod: 8220-BELT6T5/1500/SP
Price 11.50€

Flat cable multicolor

Flat cable multicolor

Multicolor flat cable length 3 meters, for 3DRAG ..

Cod: 8220-FC16C-3/SP
Price 4.10€

Needle syringe SIRBD50ML

Needle syringe SIRBD50ML

Needle fo specifically for 60cc syringe for use with the set 3DChoco. N.B. the syringe is sold separ..

Cod: 7350-AGOMONG18
Price 0.95€

60cc syringe for 3DChoco

60cc syringe for 3DChoco

Sterile syringe dosing 60cc for use with the set 3DChoco. N.B. the needle is sold separately. ..

Cod: 7350-SIRBD50ML
Price 3.90€

Pulley 10 teeth

Pulley 10 teeth

Pulley 10 teeth, 5 mm pitch with hole for 5mm shaft, for clamping of full grain. Suitable for being ..

Cod: 7350-PUL21T5Z
Price 4.20€

Heated Kapton pad 5x10 cm

Heated Kapton pad 5x10 cm

5V kapton pad with adhesive sheet to use with your 3D printer or 3Drag choco extruder Size (cm): 10..

Cod: 7350-COM11288
Price 7.00€

Teflon cylinder for 3Drag extruder

Teflon cylinder for 3Drag extruder

Teflon cylinder for 3Drag extruder ..

Cod: 8220-7350-EXT8200FG
Price 8.20€

Blue tape for 3d printer

Blue tape for 3d printer

Roll of blue tape ideal for printing with ABS and PLA and to improve the adhesion of the printing pl..

Cod: 7350-BLUTAPE3M
Price 21.35€

Kapton tape - 200MM/30M

Kapton tape - 200MM/30M

Roll of Kapton tape, 200 mm high and 30 meters long. Used as thermal insulation (from -269 ° C t..

Cod: 7350-KAPTON20030
Price 23.00€

Inductive Proximity Sensor

Inductive Proximity Sensor

  Inductive type proximity switch with NPN (Normally Open) transistor switch LJ12A3-4-Z..

Cod: 2846-PROXSENS
Price 4.20€

Showing 1 to 24 of 36 (2 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.