Arcade Button - Yellow

Very similar to the buttons used in arcade games. Simple in design. Perfect for mashing. This button..

Cod: 6168-COM09338
Price 2.50€

Arcade button - Blue

Very similar to the buttons used in arcade games. Simple in design. Perfect for mashing. This button..

Cod: 6168-COM09337
Price 2.50€

Arcade Button - White

Very similar to the buttons used in arcade games. Simple in design. Perfect for mashing. This button..

Cod: 6168-COM09340
Price 2.50€

Case for thermostat with GSM control code TDG139

ABS case specifically drilled to accommodate the thermostat with GSM control code TDG139. It has rou..

Cod: 5100-BOXTDG139
Price 14.00€

Case for TDG134

  ABS case specifically drilled for gate opener GSM TDG134. It has rounded corners..

Cod: 5100-BOXTDG134
Price 20.00€

Case for TDG133-140

ABS case specifically drilled for GSM-8100 telecontrolli TDG133, and TDG140. It has rounded corners,..

Cod: 5100-BOXTDG
Price 14.00€

3 heat sinks for Raspberry Pi

Set consists of three heat sinks aluminum, adhesives and manufactured for use with Raspberry Pi. 1 l..

Cod: 2846-SET3DISSIP
Price 1.50€

Speaker - 2W / 8 ohm - Ø 66mm

Specifications:   - rated impedance: 8 ohm ± 15% - maximum power: 0.25 ~ 2W ..

Cod: 5310-MLS3
Price 2.20€

JST male connector 2 pin 90° - 4 Pcs

Confection with 4 pcs of JST connector for PCB 2 pin 90°. ..

Cod: 8218-2PINJSTXH
Price 2.00€

Alcohol sensor

This sensor is able to detect the concentration of alcohol in the blood through the..

Cod: 2846-MQ3
Price 3.50€

Male connector 2x20 pin

PCB male connector 2x20 pin, pitch 2,54 mm. ..

Cod: 2846-CT/2X20
Price 0.49€

Female connector 2x20 pin

Female connector 2x20 pin, pitch 2,54 mm and legnth 3 mm. ..

Cod: 2846-GP10
Price 0.41€

Female connector 2x20 pin length 12,5 mm

Female connector 2x20 pin, pitch 2,54 mm and legth 12,5 mm. ..

Cod: 2846-CTF/20+20
Price 1.65€

Flat cable with 2 female connectors 2x20 pin

Flat cable length about 20 cm with female connector 2x20 pin. You can use with Raspberry Pi tip..

Cod: 2846-POD40
Price 2.40€

Peristaltic pump 12 Vdc

Peristaltic pump with DC motor and silicone tube. Thanks to the fact that its compo..

Cod: 2846-PERIS12V
Price 11.00€

Desoldering braid 3.5 mm

Thin and soft copper braid 3.5 mm wide. It allows you to remove the pond melted with a soldering ..

Cod: 2846-TS3515
Price 2.90€

Desoldering braid 2.5 mm

Thin and soft copper braid 2.5 mm wide. It allows you to remove the pond melted with a soldering ..

Cod: 2846-TS2515
Price 2.90€

Desoldering braid 1.5 mm

Thin and soft copper braid 1.5 mm wide. It allows you to remove the pond melted with a soldering iro..

Cod: 2846-TS1515
Price 2.90€

Advanced Banana Pi Case - White

This nice and solid case for Banana Pi is a perfect choice for taking your Banana Pi any..

Cod: 9145-BANANAPIBOX
Price 12.50€

PS Connector (Female)

This is a board side female connector of SONY PS2 controller. Able to solder on your board in order ..

Cable length 30 cm with male power plug DC 5,5x2,1

Cable length 30 cm with male power plug DC 5,5x2,1 mm and positive wire and negative of the oth..

Cod: 2846-A110
Price 0.40€

Cable lenght 30 cm with female power plug DC 5,5x2,1

Cable length 30 cm with female power plug DC 5,5x2,1 mm from one side and wire positive an..

Cod: 2846-A109
Price 0.40€

Cable length 30 cm with power plug DC 5,5x2,1

Cable length 30 cm with four male power plug DC 5,5x2,1 mm and one female power plug DC 5,..

Cod: 2846-A033
Price 2.40€

ESP03 module Wi-Fi transceiver - GPIO

Small transceiver module Wi-Fi-based chip ESP8266, compatible with standard 802.11 ..

Cod: 2846-ESP03
Price 6.60€