The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Breakout board based on the humidity sensor manufactured by Honeywell and signed HIH-5030-001. Ideal for detecting the humidity present in the environment in which it is placed, operates at very low voltage (operates correctly even less than 2.7 Vcc and up to 5.5 Vcc) absorbing typically 200 microamperes, and is therefore also ideal in applications fed batteries and where it is required minimal absorption. The sensor HIH-5030-001 has the great advantage to provide, unlike the DS18B20, an analog output signal, which consists of a DC voltage that varies almost linearly to vary the relative humidity (RH); can then be interfaced to both analog circuits which control the flow of air of a dehumidification system, both be read by an A / D converter or from the entrance of a microcontroller with analog / digital converter. The sensor element of the device is of capacitive type composed of thermosetting polymers laser cut with integrated signal conditioning chip. The multilayer construction of the sensitive element provides excellent resistance to most of the risk of applications such as the formation of condensation, dust, dirt, oils and chemicals common environmental. The accuracy of the measurement, considered between 11% and 89% relative humidity is + 3% and the response time to changes in humidity is in the neighborhood of 5 seconds. The connections of the humidity sensor are essentially three: the two-pin power supply (Vcc and GND) and OUT, available via a 3-wire cable with connector JST 1.25mm pitch. Dimensions (mm): 22x22.

Breakout board
The breakout board are prototyping boards that contain the affected component already welded, whose connections are brought outside whisker of connections that can be used easily by step and termination; generally connections are pitches to 2.54 mm, such as those of the classic integrated DIP. To help those who would like to use SMD components but does not have the means or the skills to weld, they identified a number of integrated (including sensors, switching power supplies, chargers, linear amplifiers etc.), And mounted on bases ready for use. These breakout board are both a help for those who want to have ready in a "traditional" format ?? the best SMD electronics, and for those who-while managing to work with components SMD- need to have these items available on prototyping boards to apply to existing circuits and do tests, or to build prototypes that integrate the functions of its integrated, before making the final printed circuit of an apparatus.
Documentation and useful link


Write a review

Please login or register to review

Humidity sensor HIH-5030-001 - mounted

Discontinued product

Tags: humidity sensor hih-5030-001 - mounted, 7100-breakout002, futura group srl, diy kits

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.